Replacement cartridge for Covalliero's Safety Vest Spark, with airbag. When purchasing an Airbag, a CO2 cartridge is included. Please make sure to buy the correct cartridge size when it needs to be replaced.
When should the cartridge be replaced?
- After inflation, the CO2 cartridge can only be used once
- If rust or damage occurs
Cartridge size
- 45g for XXS-XS
- 50g for S-M
- 74g for L-XL
Cartridge replacement instructions
- Prepare the Allen key and a new CO2 cartridge
- Insert the Allen key into the fastener on the underside of the housing and release the mechanism
- Place the release ball in the recess. Here, it may be necessary to manipulate the mechanism back and forth with the Allen key until the ball is securely in place
- Remove the used cartridge
- Once again, press the air out of all air channels by laying the front on a clean, flat surface and running your hand over each of the channels
- Check again that the release ball is correctly in the recess
- Remove the Allen key
- Screw in a new cartridge
- Straighten the air channels and snap the existing protective caps with the push buttons
- Slide the buckle through the opening in the chamber cover and fasten it
Care instructions
- Keep out of reach of children and handle with care
- Store and use in temperatures between 0°C and +45°C
- Do not expose to high temperatures, avoid, for example, leaving it in the car, in direct sunlight, and near heaters
- Avoid shocks and impacts as this can damage the cartridge